Water hardness in Francisco Badaró
88 mg/L moderately hard
Tap water in Francisco Badaró is moderately hard: 88 mg/L (5.1 gpg · 4.9 °dH · 8.8 °fH).
Source: Ministério da Saúde, SISAGUA – controle semestral (Copasa Servicos De Saneamento Integrado Do Norte E Nordeste De Minas Gerais Sa), CC BY-ND 3.0 (2024) · data checked 2026-10-20
Range across supply zones: 34–146 mg/L.
Francisco Badaró, in Minas Gerais, is served by Copasa Servicos De Saneamento Integrado Do Norte E Nordeste De Minas Gerais Sa. The 2024 figure is 87.6 mg/L, in the moderate category, with reported values from 34.2 to 146.0 mg/L. The wide range means some samples are soft and others close to hard.
Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
Water data
| Total hardness | 88 mg/L |
|---|---|
| Utility | Copasa Servicos De Saneamento Integrado Do Norte E Nordeste De Minas Gerais Sa |
How Francisco Badaró compares
- Tap water in Francisco Badaró is 106 % harder than the median of the 1915 cities we track in Brazil (43 mg/L).
- By hardness it ranks 289 of 1915 in Brazil (1 = hardest); 85 % of these cities have softer water.
- In Minas Gerais it is number 32 of 290 cities; the regional median is 41 mg/L.
- Nearest city with clearly softer water: Berilo, 24 km away (18 mg/L).
- Nearest city with clearly harder water: José Gonçalves de Minas, 42 km away (188 mg/L).
Ranking of the hardest and softest water in Brazil →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Francisco Badaró
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 5 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Francisco Badaró water hard or soft?
It is moderately hard: 88 mg/L as CaCO₃ (5.1 gpg, 4.9 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Francisco Badaró safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
How many grains per gallon is Francisco Badaró water?
5.1 gpg, equal to 4.9 °dH, 8.8 °fH or 88 mg/L calcium carbonate.
What dishwasher salt setting should I use in Francisco Badaró?
For 88 mg/L (4.9 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Francisco Badaró?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Ministério da Saúde, SISAGUA – controle semestral (Copasa Servicos De Saneamento Integrado Do Norte E Nordeste De Minas Gerais Sa), CC BY-ND 3.0 (2024). Method: figure published by the water supplier. Ministério da Saúde, SISAGUA – controle semestral (Copasa Servicos De Saneamento Integrado Do Norte E Nordeste De Minas Gerais Sa), CC BY-ND 3.0 · Outdated figure? Tell us