Water hardness in General Maynard
118 mg/L moderately hard
Tap water in General Maynard is moderately hard: 118 mg/L (6.9 gpg · 6.6 °dH · 11.8 °fH).
Source: Ministério da Saúde, SISAGUA – controle semestral (Igua Sergipe Sa), CC BY-ND 3.0 (2025) · data checked 2026-10-20
Range across supply zones: 39–196 mg/L.
Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
Water data
| Total hardness | 118 mg/L |
|---|---|
| Utility | Igua Sergipe Sa |
How General Maynard compares
- Tap water in General Maynard is 177 % harder than the median of the 1915 cities we track in Brazil (43 mg/L).
- By hardness it ranks 126 of 1915 in Brazil (1 = hardest); 93 % of these cities have softer water.
- In Sergipe it is number 8 of 72 cities; the regional median is 44 mg/L.
- Nearest city with clearly softer water: Rosário do Catete, 6 km away (38 mg/L).
- Nearest city with clearly harder water: Santo Amaro das Brotas, 10 km away (297 mg/L).
Ranking of the hardest and softest water in Brazil →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in General Maynard
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 7 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is General Maynard water hard or soft?
It is moderately hard: 118 mg/L as CaCO₃ (6.9 gpg, 6.6 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in General Maynard safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
How many grains per gallon is General Maynard water?
6.9 gpg, equal to 6.6 °dH, 11.8 °fH or 118 mg/L calcium carbonate.
What dishwasher salt setting should I use in General Maynard?
For 118 mg/L (6.6 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in General Maynard?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Ministério da Saúde, SISAGUA – controle semestral (Igua Sergipe Sa), CC BY-ND 3.0 (2025). Method: figure published by the water supplier. Ministério da Saúde, SISAGUA – controle semestral (Igua Sergipe Sa), CC BY-ND 3.0 · Outdated figure? Tell us