Water hardness in Itapecerica
52 mg/L soft
Tap water in Itapecerica is soft: 52 mg/L (3 gpg · 2.9 °dH · 5.2 °fH).
Source: Ministério da Saúde, SISAGUA – controle semestral (Copasa Itapecerica), CC BY-ND 3.0 (2025) · data checked 2026-10-20
Range across supply zones: 22–57 mg/L.
Tap water in Itapecerica (Minas Gerais) is supplied by Copasa Itapecerica. The Ministry of Health drinking-water monitoring data, dated 2025, reports a hardness of 51.6 mg/L, which falls in the soft category. Reported values across the monitoring points range from 21.9 to 56.7 mg/L, so hardness can differ within the town.
Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
Water data
| Total hardness | 52 mg/L |
|---|---|
| Utility | Copasa Itapecerica |
How Itapecerica compares
- Tap water in Itapecerica is 21 % harder than the median of the 1915 cities we track in Brazil (43 mg/L).
- By hardness it ranks 765 of 1915 in Brazil (1 = hardest); 60 % of these cities have softer water.
- In Minas Gerais it is number 98 of 290 cities; the regional median is 41 mg/L.
- Nearest city with clearly softer water: Pedra do Indaiá, 23 km away (22 mg/L).
- Nearest city with clearly harder water: Arcos, 55 km away (231 mg/L).
Ranking of the hardest and softest water in Brazil →
What it means at home
- Little or no limescale in kettles, water heaters or washing machines.
- Soap lathers easily; water does not dry skin or hair.
- Dishwasher: salt setting at minimum or off.
- No softener needed; a jug filter only changes taste.
How much salt will you use for softening?
No. Water this soft does not need softening.
Descale a coffee machine or kettle about every 6 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Itapecerica
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 3 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Itapecerica water hard or soft?
It is soft: 52 mg/L as CaCO₃ (3 gpg, 2.9 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Itapecerica safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
How many grains per gallon is Itapecerica water?
3 gpg, equal to 2.9 °dH, 5.2 °fH or 52 mg/L calcium carbonate.
What dishwasher salt setting should I use in Itapecerica?
For 52 mg/L (2.9 °dH) check your manufacturer's table: level 0–1, usually no salt.
Do I need a water softener in Itapecerica?
No. With soft water a softener adds nothing.
Source
Source: Ministério da Saúde, SISAGUA – controle semestral (Copasa Itapecerica), CC BY-ND 3.0 (2025). Method: figure published by the water supplier. Ministério da Saúde, SISAGUA – controle semestral (Copasa Itapecerica), CC BY-ND 3.0 · Outdated figure? Tell us