Water hardness in Jacupiranga
20 mg/L soft
Tap water in Jacupiranga is soft: 20 mg/L (1.2 gpg · 1.1 °dH · 2 °fH).
Source: Ministério da Saúde, SISAGUA – controle semestral (Companhia De Saneamento Basico Do Estado De Sao Paulo), CC BY-ND 3.0 (2026) · data checked 2026-10-20
Tap water in Jacupiranga (São Paulo) is supplied by Companhia De Saneamento Basico Do Estado De Sao Paulo, and the 2026 figure reported to the Ministry of Health is 20.0 mg/L, which counts as soft. Only a single figure is published, so the value at your tap may differ. Soft water leaves little limescale on kettles and fixtures.
Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
Water data
| Total hardness | 20 mg/L |
|---|---|
| Utility | Companhia De Saneamento Basico Do Estado De Sao Paulo |
How Jacupiranga compares
- Tap water in Jacupiranga is 53 % softer than the median of the 1915 cities we track in Brazil (43 mg/L).
- By hardness it ranks 1569 of 1915 in Brazil (1 = hardest); 18 % of these cities have softer water.
- In São Paulo it is number 429 of 530 cities; the regional median is 42 mg/L.
- Nearest city with clearly softer water: Cananéia, 23 km away (15 mg/L).
- Nearest city with clearly harder water: Cajati, 16 km away (37 mg/L).
Ranking of the hardest and softest water in Brazil →
What it means at home
- Little or no limescale in kettles, water heaters or washing machines.
- Soap lathers easily; water does not dry skin or hair.
- Dishwasher: salt setting at minimum or off.
- No softener needed; a jug filter only changes taste.
How much salt will you use for softening?
No. Water this soft does not need softening.
Descale a coffee machine or kettle about every 6 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Jacupiranga
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 1 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Jacupiranga water hard or soft?
It is soft: 20 mg/L as CaCO₃ (1.2 gpg, 1.1 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Jacupiranga safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
How many grains per gallon is Jacupiranga water?
1.2 gpg, equal to 1.1 °dH, 2 °fH or 20 mg/L calcium carbonate.
What dishwasher salt setting should I use in Jacupiranga?
For 20 mg/L (1.1 °dH) check your manufacturer's table: level 0–1, usually no salt.
Do I need a water softener in Jacupiranga?
No. With soft water a softener adds nothing.
Source
Source: Ministério da Saúde, SISAGUA – controle semestral (Companhia De Saneamento Basico Do Estado De Sao Paulo), CC BY-ND 3.0 (2026). Method: figure published by the water supplier. Ministério da Saúde, SISAGUA – controle semestral (Companhia De Saneamento Basico Do Estado De Sao Paulo), CC BY-ND 3.0 · Outdated figure? Tell us