Water hardness in Mairiporã
24 mg/L soft
Tap water in Mairiporã is soft: 24 mg/L (1.4 gpg · 1.3 °dH · 2.4 °fH).
Source: Ministério da Saúde, SISAGUA – controle semestral (Companhia De Saneamento Basico Do Estado De Sao Paulo), CC BY-ND 3.0 (2026) · data checked 2026-10-20
Range across supply zones: 11–46 mg/L.
Mairiporã is supplied by Sabesp from the metropolitan network of interlinked producer systems, the largest being Cantareira, with Guarapiranga, Alto Tietê and Rio Grande behind it; Cantareira relies partly on water transferred from the Piracicaba basin. Records for 2026 give a median of 24.0 mg/L CaCO₃, with individual results from 11.0 to 46.0 mg/L. Scale on kettles and taps is unlikely; soft water also rinses soap slowly, so dose detergent and shampoo sparingly.
Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
Water data
| Total hardness | 24 mg/L |
|---|---|
| Utility | Companhia De Saneamento Basico Do Estado De Sao Paulo |
How Mairiporã compares
- Tap water in Mairiporã is 44 % softer than the median of the 1915 cities we track in Brazil (43 mg/L).
- By hardness it ranks 1461 of 1915 in Brazil (1 = hardest); 23 % of these cities have softer water.
- In São Paulo it is number 395 of 530 cities; the regional median is 42 mg/L.
- Nearest city with clearly softer water: Piracaia, 41 km away (9 mg/L).
- Nearest city with clearly harder water: Guarulhos, 18 km away (52 mg/L).
Ranking of the hardest and softest water in Brazil →
What it means at home
- Little or no limescale in kettles, water heaters or washing machines.
- Soap lathers easily; water does not dry skin or hair.
- Dishwasher: salt setting at minimum or off.
- No softener needed; a jug filter only changes taste.
How much salt will you use for softening?
No. Water this soft does not need softening.
Descale a coffee machine or kettle about every 6 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Mairiporã
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 1 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Mairiporã water hard or soft?
It is soft: 24 mg/L as CaCO₃ (1.4 gpg, 1.3 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Mairiporã safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
How many grains per gallon is Mairiporã water?
1.4 gpg, equal to 1.3 °dH, 2.4 °fH or 24 mg/L calcium carbonate.
What dishwasher salt setting should I use in Mairiporã?
For 24 mg/L (1.3 °dH) check your manufacturer's table: level 0–1, usually no salt.
Do I need a water softener in Mairiporã?
No. With soft water a softener adds nothing.
Source
Source: Ministério da Saúde, SISAGUA – controle semestral (Companhia De Saneamento Basico Do Estado De Sao Paulo), CC BY-ND 3.0 (2026). Method: figure published by the water supplier. Ministério da Saúde, SISAGUA – controle semestral (Companhia De Saneamento Basico Do Estado De Sao Paulo), CC BY-ND 3.0 · Outdated figure? Tell us