Water hardness in Piracicaba
76 mg/L moderately hard
Tap water in Piracicaba is moderately hard: 76 mg/L (4.4 gpg · 4.2 °dH · 7.5 °fH).
Source: Ministério da Saúde, SISAGUA – controle semestral (Semae Piracicaba), CC BY-ND 3.0 (2026) · data checked 2026-10-20
Range across supply zones: 38–110 mg/L.
Piracicaba is in São Paulo state, where some municipal utilities use deep wells in the Guarani aquifer and others use river intakes; the sources checked do not say which applies here. Records for 2026 give a median of 75.5 mg/L CaCO₃, with individual results from 38.4 to 110.4 mg/L. At this level scale builds slowly on heaters and taps; a periodic descaling of the kettle and washing machine is enough.
Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
Water data
| Total hardness | 76 mg/L |
|---|---|
| Utility | Semae Piracicaba |
How Piracicaba compares
- Tap water in Piracicaba is 78 % harder than the median of the 1915 cities we track in Brazil (43 mg/L).
- By hardness it ranks 405 of 1915 in Brazil (1 = hardest); 79 % of these cities have softer water.
- In São Paulo it is number 99 of 530 cities; the regional median is 42 mg/L.
- Nearest city with clearly softer water: Rio das Pedras, 14 km away (23 mg/L).
- Nearest city with clearly harder water: Saltinho, 17 km away (106 mg/L).
Ranking of the hardest and softest water in Brazil →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Piracicaba
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 4 °dH |
| AEG / Electrolux | 2 |
| Beko | 1st |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Piracicaba water hard or soft?
It is moderately hard: 76 mg/L as CaCO₃ (4.4 gpg, 4.2 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Piracicaba safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
How many grains per gallon is Piracicaba water?
4.4 gpg, equal to 4.2 °dH, 7.5 °fH or 76 mg/L calcium carbonate.
What dishwasher salt setting should I use in Piracicaba?
For 76 mg/L (4.2 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Piracicaba?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Ministério da Saúde, SISAGUA – controle semestral (Semae Piracicaba), CC BY-ND 3.0 (2026). Method: figure published by the water supplier. Ministério da Saúde, SISAGUA – controle semestral (Semae Piracicaba), CC BY-ND 3.0 · Outdated figure? Tell us