Water hardness in Severínia
114 mg/L moderately hard
Tap water in Severínia is moderately hard: 114 mg/L (6.7 gpg · 6.4 °dH · 11.4 °fH).
Source: Ministério da Saúde, SISAGUA – controle semestral (Servico Autonomo De Agua E Esgoto De Severinia), CC BY-ND 3.0 (2024) · data checked 2026-10-20
Range across supply zones: 37–202 mg/L.
Tap water in Severínia (São Paulo) is supplied by Servico Autonomo De Agua E Esgoto De Severinia, and the 2024 figure reported to the Ministry of Health is 114.4 mg/L, which counts as moderately hard. Individual results ranged from 36.7 to 202.0 mg/L, so the value at your tap can differ widely from the median. Some limescale can form on kettles and fixtures over time.
Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
Water data
| Total hardness | 114 mg/L |
|---|---|
| Utility | Servico Autonomo De Agua E Esgoto De Severinia |
How Severínia compares
- Tap water in Severínia is 169 % harder than the median of the 1915 cities we track in Brazil (43 mg/L).
- By hardness it ranks 141 of 1915 in Brazil (1 = hardest); 93 % of these cities have softer water.
- In São Paulo it is number 17 of 530 cities; the regional median is 42 mg/L.
- Nearest city with clearly softer water: Embaúba, 19 km away (43 mg/L).
- Nearest city with clearly harder water: Orindiúva, 87 km away (158 mg/L).
Ranking of the hardest and softest water in Brazil →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Severínia
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 6 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Severínia water hard or soft?
It is moderately hard: 114 mg/L as CaCO₃ (6.7 gpg, 6.4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Severínia safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Portaria GM/MS nº 888/2021 sets a maximum of 300 mg/L CaCO₃ for total hardness (dureza total); operators report it in mg/L to SISAGUA.
How many grains per gallon is Severínia water?
6.7 gpg, equal to 6.4 °dH, 11.4 °fH or 114 mg/L calcium carbonate.
What dishwasher salt setting should I use in Severínia?
For 114 mg/L (6.4 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Severínia?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Ministério da Saúde, SISAGUA – controle semestral (Servico Autonomo De Agua E Esgoto De Severinia), CC BY-ND 3.0 (2024). Method: figure published by the water supplier. Ministério da Saúde, SISAGUA – controle semestral (Servico Autonomo De Agua E Esgoto De Severinia), CC BY-ND 3.0 · Outdated figure? Tell us