Water hardness in Merklín
1.86 mmol/L very hard
Tap water in Merklín is very hard: 1.86 mmol/L (186 mg/L · 10.9 gpg · 10.4 °dH).
Source: ČEVAK a.s. (Veolia), Moje obec – kvalita pitné vody (2026) · data checked 2026-10-21
Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
Water data
| Total hardness | 1.86 mmol/L |
|---|---|
| Calcium (mg/L) | 57.2 |
| Magnesium (mg/L) | 10.6 |
| Utility | ČEVAK a.s. |
How Merklín compares
- Tap water in Merklín is 55 % harder than the median of the 1516 cities we track in Czechia (1.2 mmol/L).
- By hardness it ranks 391 of 1516 in Czechia (1 = hardest); 74 % of these cities have softer water.
- In Plzeňský kraj it is number 19 of 75 cities; the regional median is 1.64 mmol/L.
- Nearest city with clearly softer water: Soběkury, 3 km away (1.21 mmol/L).
- Nearest city with clearly harder water: Chotěšov, 10 km away (4.4 mmol/L).
Ranking of the hardest and softest water in Czechia →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Merklín
| Brand | Setting for this water |
|---|---|
| Bosch | H03 |
| Miele | 10 °dH |
| AEG / Electrolux | 2 |
| Beko | 3rd |
| Hoover | S2 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Merklín water hard or soft?
It is very hard: 186 mg/L as CaCO₃ (10.9 gpg, 10.4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Merklín safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
How many grains per gallon is Merklín water?
10.9 gpg, equal to 10.4 °dH, 18.6 °fH or 186 mg/L calcium carbonate.
What dishwasher salt setting should I use in Merklín?
For 186 mg/L (10.4 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Merklín?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: ČEVAK a.s. (Veolia), Moje obec – kvalita pitné vody (2026). Method: figure published by the water supplier. ČEVAK a.s. (Veolia), Moje obec – kvalita pitné vody · Outdated figure? Tell us