Water hardness in Prosetín
5.03 mmol/L very hard
Tap water in Prosetín is very hard: 5.03 mmol/L (504 mg/L · 29.4 gpg · 28.2 °dH).
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026) · data checked 2026-10-23
Range across supply zones: 491–516 mg/L.
SčVK reports 503.5 mg/L for Prosetín in the Děčín district, with values from 491.4 to 515.5 mg/L. This is very hard water and above the 500 mg/L level we review before publishing. Scale will form quickly on heaters and fittings. A softener or a descaling routine is advisable.
Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
Water data
| Total hardness | 5.03 mmol/L |
|---|---|
| Calcium (mg/L) | 66.5 |
| Magnesium (mg/L) | 81.7 |
| Utility | Severočeské vodovody a kanalizace, a.s. (SčVK) |
How Prosetín compares
- Tap water in Prosetín is 319 % harder than the median of the 1516 cities we track in Czechia (1.2 mmol/L).
- By hardness it ranks 24 of 1516 in Czechia (1 = hardest); 98 % of these cities have softer water.
- In Ústecký kraj it is number 24 of 631 cities; the regional median is 1.31 mmol/L.
- Nearest city with clearly softer water: Choratice, 2 km away (0.55 mmol/L).
Ranking of the hardest and softest water in Czechia →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Prosetín
| Brand | Setting for this water |
|---|---|
| Bosch | H06 |
| Miele | 28 °dH |
| AEG / Electrolux | 6 |
| Beko | 6th |
| Hoover | S4 |
| LG | H4 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Prosetín water hard or soft?
It is very hard: 504 mg/L as CaCO₃ (29.4 gpg, 28.2 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Prosetín safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
How many grains per gallon is Prosetín water?
29.4 gpg, equal to 28.2 °dH, 50.4 °fH or 504 mg/L calcium carbonate.
What dishwasher salt setting should I use in Prosetín?
For 504 mg/L (28.2 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Prosetín?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026). Method: figure published by the water supplier. SčVK, Moje obec – kvalita vody (aktuální hodnoty) · Outdated figure? Tell us