Water hardness in Týniště
2.43 mmol/L very hard
Tap water in Týniště is very hard: 2.43 mmol/L (244 mg/L · 14.2 gpg · 13.7 °dH).
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026) · data checked 2026-10-21
Range across supply zones: 217–270 mg/L.
Týniště in the Ústí nad Labem district is served by SčVK, which reports a median of 243.7 mg/L with a range of 217.2 to 270.2 mg/L (2026). That is very hard water. The source is not named on the utility's page. Expect heavy scale on kettles and heaters; a softener or scale protection is worth considering.
Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
Water data
| Total hardness | 2.43 mmol/L |
|---|---|
| Calcium (mg/L) | 67 |
| Magnesium (mg/L) | 17.2 |
| Utility | Severočeské vodovody a kanalizace, a.s. (SčVK) |
How Týniště compares
- Tap water in Týniště is 103 % harder than the median of the 1516 cities we track in Czechia (1.2 mmol/L).
- By hardness it ranks 291 of 1516 in Czechia (1 = hardest); 81 % of these cities have softer water.
- In Ústecký kraj it is number 221 of 631 cities; the regional median is 1.31 mmol/L.
- Nearest city with clearly softer water: Knínice, 1 km away (0.95 mmol/L).
- Nearest city with clearly harder water: Lhota pod Pannou, 4 km away (3.73 mmol/L).
Ranking of the hardest and softest water in Czechia →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Týniště
| Brand | Setting for this water |
|---|---|
| Bosch | H04 |
| Miele | 14 °dH |
| AEG / Electrolux | 3 |
| Beko | 4th |
| Hoover | S2 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Týniště water hard or soft?
It is very hard: 244 mg/L as CaCO₃ (14.2 gpg, 13.7 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Týniště safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
How many grains per gallon is Týniště water?
14.2 gpg, equal to 13.7 °dH, 24.4 °fH or 244 mg/L calcium carbonate.
What dishwasher salt setting should I use in Týniště?
For 244 mg/L (13.7 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Týniště?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026). Method: figure published by the water supplier. SčVK, Moje obec – kvalita vody (aktuální hodnoty) · Outdated figure? Tell us