Water hardness in Antsla
2.8 mmol/L very hard
Tap water in Antsla is very hard: 2.8 mmol/L (280 mg/L · 16.4 gpg · 15.7 °dH).
Source: Terviseamet, veevärkide veeproovid (avalikud andmed) 2021–2025 (2023-08) · data checked 2026-10-20
Range across supply zones: 270–290 mg/L.
Estonian laboratories report total hardness (üldkaredus) in mmol/L or mg-eq/L (1 mmol/L = 2 mg-eq/L = 100 mg/L CaCO₃); groundwater supplies are mostly hard.
Water data
| Total hardness | 2.8 mmol/L |
|---|
How Antsla compares
- Tap water in Antsla is 20 % harder than the median of the 28 cities we track in Estonia (2.32 mmol/L).
- By hardness it ranks 8 of 28 in Estonia (1 = hardest); 74 % of these cities have softer water.
- In Võrumaa it is number 1 of 3 cities; the regional median is 2.75 mmol/L.
- Nearest city with clearly softer water: Vana-Antsla, 5 km away (2.15 mmol/L).
- Nearest city with clearly harder water: Paide, 132 km away (3.72 mmol/L).
Ranking of the hardest and softest water in Estonia →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Antsla
| Brand | Setting for this water |
|---|---|
| Bosch | H04 |
| Miele | 16 °dH |
| AEG / Electrolux | 4 |
| Beko | 4th |
| Hoover | S2 |
| LG | H3 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Antsla water hard or soft?
It is very hard: 280 mg/L as CaCO₃ (16.4 gpg, 15.7 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Antsla safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Estonian laboratories report total hardness (üldkaredus) in mmol/L or mg-eq/L (1 mmol/L = 2 mg-eq/L = 100 mg/L CaCO₃); groundwater supplies are mostly hard.
How many grains per gallon is Antsla water?
16.4 gpg, equal to 15.7 °dH, 28 °fH or 280 mg/L calcium carbonate.
What dishwasher salt setting should I use in Antsla?
For 280 mg/L (15.7 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Antsla?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: Terviseamet, veevärkide veeproovid (avalikud andmed) 2021–2025 (2023-08). Method: own measurement. Terviseamet, veevärkide veeproovid (avalikud andmed) 2021–2025 · Outdated figure? Tell us