Water hardness in Amagasaki
41 mg/L soft
Tap water in Amagasaki is soft: 41 mg/L (2.4 gpg · 2.3 °dH · 4.1 °fH).
Source: Amagasaki City Waterworks, monthly water-quality reports FY2025 (令和7年度分 水質月報) (2025) · data checked 2026-10-21
Range across supply zones: 36–45 mg/L.
Amagasaki buys water from the Hanshin Water Supply Authority, which treats Yodo River and Lake Biwa water. Hardness is reported at 41.0 mg/L CaCO₃, ranging from 36.0 to 45.0 mg/L (2025 data). Limescale is mild here, appearing slowly on kettles and taps, so occasional descaling is enough.
Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
Water data
| Total hardness | 41 mg/L |
|---|---|
| Utility | Amagasaki City Public Enterprise Bureau (Waterworks) |
How Amagasaki compares
- Tap water in Amagasaki is 18 % softer than the median of the 228 cities we track in Japan (50 mg/L).
- By hardness it ranks 163 of 228 in Japan (1 = hardest); 27 % of these cities have softer water.
- In Hyogo it is number 2 of 6 cities; the regional median is 40 mg/L.
- Nearest city with clearly softer water: Tondabayashi, 29 km away (17 mg/L).
- Nearest city with clearly harder water: Ikeda, 12 km away (55 mg/L).
Ranking of the hardest and softest water in Japan →
What it means at home
- Little or no limescale in kettles, water heaters or washing machines.
- Soap lathers easily; water does not dry skin or hair.
- Dishwasher: salt setting at minimum or off.
- No softener needed; a jug filter only changes taste.
How much salt will you use for softening?
No. Water this soft does not need softening.
Descale a coffee machine or kettle about every 6 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Amagasaki
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 2 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Amagasaki water hard or soft?
It is soft: 41 mg/L as CaCO₃ (2.4 gpg, 2.3 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Amagasaki safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
How many grains per gallon is Amagasaki water?
2.4 gpg, equal to 2.3 °dH, 4.1 °fH or 41 mg/L calcium carbonate.
What dishwasher salt setting should I use in Amagasaki?
For 41 mg/L (2.3 °dH) check your manufacturer's table: level 0–1, usually no salt.
Do I need a water softener in Amagasaki?
No. With soft water a softener adds nothing.
Source
Source: Amagasaki City Waterworks, monthly water-quality reports FY2025 (令和7年度分 水質月報) (2025). Method: figure published by the water supplier. Amagasaki City Waterworks, monthly water-quality reports FY2025 (令和7年度分 水質月報) · Outdated figure? Tell us