Water hardness in Urayasu
75 mg/L moderately hard
Tap water in Urayasu is moderately hard: 75 mg/L (4.4 gpg · 4.2 °dH · 7.5 °fH).
Source: 千葉県企業局 Chiba Prefectural Waterworks Bureau (千葉県営水道), tap-water quality results FY2025 (2025) · data checked 2026-10-21
Range across supply zones: 52–86 mg/L.
Urayasu is served by the Chiba Prefectural Waterworks Bureau's Kashiwai plant, which treats water from Lake Inba and the Tone River. The reported figure is 74.5 mg/L CaCO₃ (range 52.0 to 86.0 mg/L, 2025 data). Scale is noticeable on kettles, heaters and tap fittings, so descale more often; a softening cartridge is optional.
Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
Water data
| Total hardness | 75 mg/L |
|---|---|
| Utility | Chiba Prefectural Waterworks Bureau |
How Urayasu compares
- Tap water in Urayasu is 48 % harder than the median of the 228 cities we track in Japan (50 mg/L).
- By hardness it ranks 18 of 228 in Japan (1 = hardest); 93 % of these cities have softer water.
- In Chiba it is number 7 of 11 cities; the regional median is 76 mg/L.
- Nearest city with clearly softer water: Shibuya, 18 km away (59 mg/L).
- Nearest city with clearly harder water: Hakone, 95 km away (110 mg/L).
Ranking of the hardest and softest water in Japan →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Urayasu
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 4 °dH |
| AEG / Electrolux | 2 |
| Beko | 1st |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Urayasu water hard or soft?
It is moderately hard: 75 mg/L as CaCO₃ (4.4 gpg, 4.2 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Urayasu safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
How many grains per gallon is Urayasu water?
4.4 gpg, equal to 4.2 °dH, 7.5 °fH or 75 mg/L calcium carbonate.
What dishwasher salt setting should I use in Urayasu?
For 75 mg/L (4.2 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Urayasu?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: 千葉県企業局 Chiba Prefectural Waterworks Bureau (千葉県営水道), tap-water quality results FY2025 (2025). Method: figure published by the water supplier. 千葉県企業局 Chiba Prefectural Waterworks Bureau (千葉県営水道), tap-water quality results FY2025 · Outdated figure? Tell us