Water hardness in Yongin
72 mg/L moderately hard
Tap water in Yongin is moderately hard: 72 mg/L (4.2 gpg · 4 °dH · 7.2 °fH).
Source: K-water / 경기도 용인시 via data.go.kr (2025) · data checked 2026-10-20
Yongin reports a median of 71.5 mg/L CaCO₃ for its treated water in 2025. Much of the Seoul metropolitan area is supplied from the Han River system; the raw-water source of this municipal utility is not confirmed here. Limescale shows on kettles, taps and shower glass within weeks, which regular descaling handles; a softener is optional.
Korean waterworks report hardness (경도) in mg/L CaCO₃; the drinking-water standard is 300 mg/L (1,000 mg/L for some sources).
Water data
| Total hardness | 72 mg/L |
|---|---|
| Utility | Yongin-si (경기도 용인시) |
How Yongin compares
- Tap water in Yongin is 26 % harder than the median of the 127 cities we track in South Korea (57 mg/L).
- By hardness it ranks 39 of 127 in South Korea (1 = hardest); 69 % of these cities have softer water.
- In Gyeonggi-do it is number 9 of 25 cities; the regional median is 68 mg/L.
- Nearest city with clearly softer water: Namyangju, 40 km away (57 mg/L).
- Nearest city with clearly harder water: Icheon, 32 km away (108 mg/L).
Ranking of the hardest and softest water in South Korea →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Yongin
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 4 °dH |
| AEG / Electrolux | 2 |
| Beko | 1st |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Yongin water hard or soft?
It is moderately hard: 72 mg/L as CaCO₃ (4.2 gpg, 4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Yongin safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Korean waterworks report hardness (경도) in mg/L CaCO₃; the drinking-water standard is 300 mg/L (1,000 mg/L for some sources).
How many grains per gallon is Yongin water?
4.2 gpg, equal to 4 °dH, 7.2 °fH or 72 mg/L calcium carbonate.
What dishwasher salt setting should I use in Yongin?
For 72 mg/L (4 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Yongin?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: K-water / 경기도 용인시 via data.go.kr (2025). Method: figure published by the water supplier. K-water / 경기도 용인시 via data.go.kr · Outdated figure? Tell us