Water hardness in Wuri
152 mg/L hard
Tap water in Wuri is hard: 152 mg/L (8.9 gpg · 8.5 °dH · 15.2 °fH).
Source: Taiwan Water Corporation open data (2026) · data checked 2026-10-20
Wuri is reported by Taiwan Water Corporation at 152.0 mg/L CaCO₃ in 2026 (customer tap water). Part of Taichung's drinking water comes from the Dajia River, where Deji Reservoir supplies municipal water. At this level scale builds up quickly in kettles, heaters and shower heads, so a softener or scale protection is worth considering.
Taiwan Water Corporation reports total hardness in mg/L CaCO₃; the drinking-water standard is 300 mg/L.
Water data
| Total hardness | 152 mg/L |
|---|---|
| Utility | Taiwan Water Corporation |
How Wuri compares
- Tap water in Wuri is 21 % harder than the median of the 265 cities we track in Taiwan (126 mg/L).
- By hardness it ranks 90 of 265 in Taiwan (1 = hardest); 66 % of these cities have softer water.
- In Taichung it is number 2 of 21 cities; the regional median is 120 mg/L.
- Nearest city with clearly softer water: Dali, 6 km away (109 mg/L).
- Nearest city with clearly harder water: Buxin, 19 km away (201 mg/L).
Ranking of the hardest and softest water in Taiwan →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Wuri
| Brand | Setting for this water |
|---|---|
| Bosch | H02 |
| Miele | 9 °dH |
| AEG / Electrolux | 2 |
| Beko | 3rd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Wuri water hard or soft?
It is hard: 152 mg/L as CaCO₃ (8.9 gpg, 8.5 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Wuri safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Taiwan Water Corporation reports total hardness in mg/L CaCO₃; the drinking-water standard is 300 mg/L.
How many grains per gallon is Wuri water?
8.9 gpg, equal to 8.5 °dH, 15.2 °fH or 152 mg/L calcium carbonate.
What dishwasher salt setting should I use in Wuri?
For 152 mg/L (8.5 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Wuri?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: Taiwan Water Corporation open data (2026). Method: figure published by the water supplier. Taiwan Water Corporation open data · Outdated figure? Tell us