Water hardness in Bentley
291 mg/L very hard
Tap water in Bentley is very hard: 291 mg/L (17 gpg · 16.3 °dH · 29.1 °fH).
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-09) · data checked 2026-10-19
Range across supply zones: 263–310 mg/L.
Bentley is supplied by Yorkshire Water, whose supply comes from a mix of upland reservoirs, rivers and boreholes; the company says water in the west comes off the moors while the east relies mostly on boreholes and groundwater. Reported hardness is 290.9 mg/L CaCO₃, ranging from 263.2 to 309.7 mg/L between supply zones. The harder supply reflects borehole and groundwater sources, which pick up calcium and magnesium from the rock; expect visible limescale on taps, kettles and in boilers; a softener or scale inhibitor is worth considering, especially for hot-water systems.
UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
Water data
| Total hardness | 291 mg/L |
|---|---|
| Utility | Yorkshire Water |
How Bentley compares
- Tap water in Bentley is 58 % harder than the median of the 471 cities we track in the United Kingdom (185 mg/L).
- By hardness it ranks 100 of 471 in the United Kingdom (1 = hardest); 79 % of these cities have softer water.
- In Doncaster it is number 2 of 11 cities; the regional median is 269 mg/L.
- Nearest city with clearly softer water: Darfield, 15 km away (220 mg/L).
- Nearest city with clearly harder water: Cottingham, 56 km away (371 mg/L).
Ranking of the hardest and softest water in the United Kingdom →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Bentley
| Brand | Setting for this water |
|---|---|
| Bosch | H04 |
| Miele | 16 °dH |
| AEG / Electrolux | 4 |
| Beko | 5th |
| Hoover | S2 |
| LG | H3 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Bentley water hard or soft?
It is very hard: 291 mg/L as CaCO₃ (17 gpg, 16.3 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Bentley safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
How many grains per gallon is Bentley water?
17 gpg, equal to 16.3 °dH, 29.1 °fH or 291 mg/L calcium carbonate.
What dishwasher salt setting should I use in Bentley?
For 291 mg/L (16.3 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Bentley?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-09). Method: own measurement. Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) · Outdated figure? Tell us