Water hardness in Bolton upon Dearne
280 mg/L very hard
Tap water in Bolton upon Dearne is very hard: 280 mg/L (16.3 gpg · 15.7 °dH · 28 °fH).
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-08) · data checked 2026-10-20
Range across supply zones: 211–297 mg/L.
The tap water in Bolton upon Dearne comes from Yorkshire Water, which draws on moorland reservoirs in the west, rivers, and boreholes that are concentrated in the east of the region. Reported hardness is 279.7 mg/L CaCO₃, ranging from 210.8 to 297.2 mg/L between supply zones. The harder supply reflects borehole and groundwater sources, which pick up calcium and magnesium from the rock; it is hard to very hard water, so scale builds quickly on kettles, showers and heating elements and shortens appliance life unless treated.
UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
Water data
| Total hardness | 280 mg/L |
|---|---|
| Utility | Yorkshire Water |
How Bolton upon Dearne compares
- Tap water in Bolton upon Dearne is 52 % harder than the median of the 471 cities we track in the United Kingdom (185 mg/L).
- By hardness it ranks 138 of 471 in the United Kingdom (1 = hardest); 70 % of these cities have softer water.
- In Barnsley it is number 3 of 11 cities; the regional median is 227 mg/L.
- Nearest city with clearly softer water: Darfield, 4 km away (220 mg/L).
- Nearest city with clearly harder water: Cottingham, 66 km away (371 mg/L).
Ranking of the hardest and softest water in the United Kingdom →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Bolton upon Dearne
| Brand | Setting for this water |
|---|---|
| Bosch | H04 |
| Miele | 16 °dH |
| AEG / Electrolux | 4 |
| Beko | 4th |
| Hoover | S2 |
| LG | H3 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Bolton upon Dearne water hard or soft?
It is very hard: 280 mg/L as CaCO₃ (16.3 gpg, 15.7 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Bolton upon Dearne safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
How many grains per gallon is Bolton upon Dearne water?
16.3 gpg, equal to 15.7 °dH, 28 °fH or 280 mg/L calcium carbonate.
What dishwasher salt setting should I use in Bolton upon Dearne?
For 280 mg/L (15.7 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Bolton upon Dearne?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-08). Method: own measurement. Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) · Outdated figure? Tell us