Water hardness in Denby Dale
79 mg/L moderately hard
Tap water in Denby Dale is moderately hard: 79 mg/L (4.6 gpg · 4.4 °dH · 7.9 °fH).
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-06) · data checked 2026-10-20
Range across supply zones: 71–82 mg/L.
UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
Water data
| Total hardness | 79 mg/L |
|---|---|
| Utility | Yorkshire Water |
How Denby Dale compares
- Tap water in Denby Dale is 57 % softer than the median of the 471 cities we track in the United Kingdom (185 mg/L).
- By hardness it ranks 346 of 471 in the United Kingdom (1 = hardest); 27 % of these cities have softer water.
- In Kirklees it is number 7 of 13 cities; the regional median is 79 mg/L.
- Nearest city with clearly softer water: Penistone, 6 km away (54 mg/L).
- Nearest city with clearly harder water: Darton, 9 km away (227 mg/L).
Ranking of the hardest and softest water in the United Kingdom →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Denby Dale
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 4 °dH |
| AEG / Electrolux | 2 |
| Beko | 1st |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Denby Dale water hard or soft?
It is moderately hard: 79 mg/L as CaCO₃ (4.6 gpg, 4.4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Denby Dale safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
How many grains per gallon is Denby Dale water?
4.6 gpg, equal to 4.4 °dH, 7.9 °fH or 79 mg/L calcium carbonate.
What dishwasher salt setting should I use in Denby Dale?
For 79 mg/L (4.4 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Denby Dale?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-06). Method: own measurement. Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) · Outdated figure? Tell us