Water hardness in Skipton
18 mg/L soft
Tap water in Skipton is soft: 18 mg/L (1 gpg · 1 °dH · 1.8 °fH).
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-06) · data checked 2026-10-20
Range across supply zones: 16–19 mg/L.
Yorkshire Water supplies Skipton from a network that blends reservoir, river and borehole sources, and the company links harder water in the east of the region to its borehole and groundwater supplies. Reported hardness is 17.6 mg/L CaCO₃, ranging from 15.7 to 19.4 mg/L between supply zones. Reservoir water from moorland catchments carries little dissolved calcium, which keeps the water soft; the water is very soft, so limescale is rarely a problem and a softener is not needed; check detergent dosing, as soft water needs less.
UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
Water data
| Total hardness | 18 mg/L |
|---|---|
| Utility | Yorkshire Water |
How Skipton compares
- Tap water in Skipton is 90 % softer than the median of the 471 cities we track in the United Kingdom (185 mg/L).
- By hardness it ranks 465 of 471 in the United Kingdom (1 = hardest); 1 % of these cities have softer water.
- Nearest city with clearly harder water: Silsden, 7 km away (49 mg/L).
Ranking of the hardest and softest water in the United Kingdom →
What it means at home
- Little or no limescale in kettles, water heaters or washing machines.
- Soap lathers easily; water does not dry skin or hair.
- Dishwasher: salt setting at minimum or off.
- No softener needed; a jug filter only changes taste.
How much salt will you use for softening?
No. Water this soft does not need softening.
Descale a coffee machine or kettle about every 6 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Skipton
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 1 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Skipton water hard or soft?
It is soft: 18 mg/L as CaCO₃ (1 gpg, 1 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Skipton safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
How many grains per gallon is Skipton water?
1 gpg, equal to 1 °dH, 1.8 °fH or 18 mg/L calcium carbonate.
What dishwasher salt setting should I use in Skipton?
For 18 mg/L (1 °dH) check your manufacturer's table: level 0–1, usually no salt.
Do I need a water softener in Skipton?
No. With soft water a softener adds nothing.
Source
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-06). Method: own measurement. Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) · Outdated figure? Tell us