Water hardness in Tadcaster
152 mg/L hard
Tap water in Tadcaster is hard: 152 mg/L (8.9 gpg · 8.5 °dH · 15.2 °fH).
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-02) · data checked 2026-10-20
Range across supply zones: 123–174 mg/L.
UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
Water data
| Total hardness | 152 mg/L |
|---|---|
| Utility | Yorkshire Water |
How Tadcaster compares
- Tap water in Tadcaster is 18 % softer than the median of the 471 cities we track in the United Kingdom (185 mg/L).
- By hardness it ranks 279 of 471 in the United Kingdom (1 = hardest); 41 % of these cities have softer water.
- In Selby it is number 4 of 4 cities; the regional median is 286 mg/L.
- Nearest city with clearly softer water: Scholes, 13 km away (93 mg/L).
- Nearest city with clearly harder water: Copmanthorpe, 9 km away (235 mg/L).
Ranking of the hardest and softest water in the United Kingdom →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Tadcaster
| Brand | Setting for this water |
|---|---|
| Bosch | H02 |
| Miele | 9 °dH |
| AEG / Electrolux | 2 |
| Beko | 3rd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Tadcaster water hard or soft?
It is hard: 152 mg/L as CaCO₃ (8.9 gpg, 8.5 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Tadcaster safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. UK suppliers report mg/L CaCO₃ and often Clark degrees (1 °Clark = 14.25 mg/L).
How many grains per gallon is Tadcaster water?
8.9 gpg, equal to 8.5 °dH, 15.2 °fH or 152 mg/L calcium carbonate.
What dishwasher salt setting should I use in Tadcaster?
For 152 mg/L (8.5 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Tadcaster?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) (2026-02). Method: own measurement. Yorkshire Water — domestic drinking water quality (Stream open data, CC BY) · Outdated figure? Tell us