Water hardness in Cloverdale
9.2 gpg hard
Tap water in Cloverdale is hard: 9.2 gpg (158 mg/L · 8.8 °dH · 15.8 °fH).
Source: California SWRCB Division of Drinking Water, EDT lab results, system CA4910002 (2025-08) · data checked 2026-10-20
Range across supply zones: 148–189 mg/L.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 9.2 gpg |
|---|---|
| Utility | Cloverdale, City Of |
How Cloverdale compares
- Tap water in Cloverdale is close to the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 682 of 1372 in the United States (1 = hardest); 50 % of these cities have softer water.
- In California it is number 181 of 336 cities; the regional median is 9.5 gpg.
- Nearest city with clearly softer water: Lakeport, 28 km away (6.3 gpg).
- Nearest city with clearly harder water: Dunnigan, 91 km away (16.9 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Cloverdale
| Brand | Setting for this water |
|---|---|
| Bosch | H02 |
| Miele | 9 °dH |
| AEG / Electrolux | 2 |
| Beko | 3rd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Cloverdale water hard or soft?
It is hard: 158 mg/L as CaCO₃ (9.2 gpg, 8.8 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Cloverdale safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Cloverdale water?
9.2 gpg, equal to 8.8 °dH, 15.8 °fH or 158 mg/L calcium carbonate.
What dishwasher salt setting should I use in Cloverdale?
For 158 mg/L (8.8 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Cloverdale?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: California SWRCB Division of Drinking Water, EDT lab results, system CA4910002 (2025-08). Method: own measurement. California SWRCB Division of Drinking Water, EDT lab results, system CA4910002 · Outdated figure? Tell us