Well water hardness in Newton County, Indiana
9.7 gpg hard
Private wells in Newton County typically give hard water: the median well sampled by the U.S. Geological Survey has 9.7 gpg (166 mg/L as CaCO₃).
Wells differ a lot, even next door: one in ten sampled wells had less than 58 mg/L and one in ten more than 247 mg/L. The figure comes from 21 wells and 57 samples taken between 1989 and 2021 (half of them by 2000).
Most samples are older than ten years. Groundwater hardness comes from the rock the well is drilled into and changes slowly, but your own well can be quite different, so treat this as a regional indication and test your water.
On city or town water instead of a well? Your utility publishes its own figures: Lowell (8.6 gpg).
What this hardness means for a well household
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How to test your well in Indiana
Hardness is only one part of a well test. Federal health agencies advise every private well owner to test regularly:
- Test a private well every year for total coliform bacteria, nitrates, total dissolved solids and pH; test more often if young children, older adults or a pregnant or nursing person live in the home. (US EPA, Protect Your Home's Water)
- Test at least once a year and ask the local health department which other germs or chemicals matter where you live. (CDC, Guidelines for Testing Well Water)
- Test private wells at least once a year; IDOH tests for bacteria, nitrate, arsenic, lead and copper, and fluoride, and advises checking with a certified laboratory which test fits. (Indiana Department of Health, Well water quality and testing)
Use a certified laboratory: Indiana Department of Health, Drinking Water Laboratory Certification (out-of-state labs table; in-state via application tool).
Indiana has no law requiring testing of private wells; private well water is unregulated and owners are responsible for their own safety (IDOH).
What a test costs (Indiana Department of Health Laboratory)
| Bacteria | $10 |
| Nitrate | $10 |
| Fluoride | $10 |
| Arsenic, lead and copper | $20 |
Prices as printed by the lab (2026-10-29); check the current fee before you send a sample. Indiana Department of Health Laboratory
If no local lab suits you, mail-in kits from certified labs test a wider panel at home; they cost more than a state or county lab.
Treating hard well water
Most households with hard well water install an ion-exchange softener. Test iron and manganese first: above about 0.3 mg/L iron a softener alone is not enough and an iron filter goes in front of it.
Nearby counties
FAQ
How hard is well water in Newton County, Indiana?
The median well sampled by the USGS in Newton County has 9.7 gpg (166 mg/L as CaCO₃), which is hard. One in ten wells had less than 58 mg/L and one in ten more than 247 mg/L.
Is my own well the same?
Not necessarily. Hardness depends on the rock layer your well draws from and on its depth, so neighbouring wells can differ by a factor of two or more. Only a test of your own water tells you.
How often should I test my well in Indiana?
Every year for coliform bacteria, nitrate, total dissolved solids and pH (EPA and CDC advice), and after floods, repairs or a change in taste or smell. Hardness, iron and manganese once, and again before you buy a softener.
Do I need a water softener for my well?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Where does this figure come from?
From 57 samples of 21 wells measured by the U.S. Geological Survey between 1989 and 2021, retrieved from the Water Quality Portal. We publish a county only when at least 10 wells were sampled.
Source and method
Computed by Water Hardness Atlas from USGS National Water Information System samples (characteristic "Hardness, Ca, Mg", sites of type well, samples since 1980), retrieved 2026-10-29 through the Water Quality Portal. For each well we take the median of its samples, then the median of all wells in the county; wells above 1,000 mg/L (oil, gas or mine brines) are left out. USGS data are in the U.S. public domain. Water Quality Portal query
Well water hardness in Indiana → · Indiana: tap water by city →