Water Hardness Atlas ZIP / postcode

Well water hardness in Caroline County, Maryland

2.2 gpg soft

Private wells in Caroline County typically give soft water: the median well sampled by the U.S. Geological Survey has 2.2 gpg (38 mg/L as CaCO₃).

<6060–120120–180>180 mg/L

Wells differ a lot, even next door: one in ten sampled wells had less than 11 mg/L and one in ten more than 123 mg/L. The figure comes from 90 wells and 138 samples taken between 1981 and 2023 (half of them by 1984).

Most samples are older than ten years. Groundwater hardness comes from the rock the well is drilled into and changes slowly, but your own well can be quite different, so treat this as a regional indication and test your water.

What this hardness means for a well household

How to test your well in Maryland

Hardness is only one part of a well test. Federal health agencies advise every private well owner to test regularly:

Use a certified laboratory: Maryland Department of the Environment, certified drinking water laboratories.

A contract for the sale of property with a private well must make water quality testing of the well a condition of the sale; settlement may not occur until both parties have the results, which stay valid for 3 years, and the purchaser may waive the test in writing (Real Property § 10-713).

What a test costs (Harford County Health Department (samples processed by the State Laboratories Administration))

Bacteriology$41
Nitrate-Nitrite$18
Hardness$23
Lead$20
Iron$20

Prices as printed by the lab (2024-12-20); check the current fee before you send a sample. Harford County Health Department (samples processed by the State Laboratories Administration)

If no local lab suits you, mail-in kits from certified labs test a wider panel at home; they cost more than a state or county lab.

Treating hard well water

Water this soft needs no softener. Soft well water can be corrosive, though: test pH, lead and copper if you see blue-green stains.

Nearby counties

Talbot County3 gpgQueen Anne's County4.3 gpgKent County, DE3.3 gpgDorchester County2.6 gpgKent County3.1 gpgSussex County, DE2 gpg

FAQ

How hard is well water in Caroline County, Maryland?

The median well sampled by the USGS in Caroline County has 2.2 gpg (38 mg/L as CaCO₃), which is soft. One in ten wells had less than 11 mg/L and one in ten more than 123 mg/L.

Is my own well the same?

Not necessarily. Hardness depends on the rock layer your well draws from and on its depth, so neighbouring wells can differ by a factor of two or more. Only a test of your own water tells you.

How often should I test my well in Maryland?

Every year for coliform bacteria, nitrate, total dissolved solids and pH (EPA and CDC advice), and after floods, repairs or a change in taste or smell. Hardness, iron and manganese once, and again before you buy a softener.

Do I need a water softener for my well?

No. With soft water a softener adds nothing.

Where does this figure come from?

From 138 samples of 90 wells measured by the U.S. Geological Survey between 1981 and 2023, retrieved from the Water Quality Portal. We publish a county only when at least 10 wells were sampled.

Source and method

Computed by Water Hardness Atlas from USGS National Water Information System samples (characteristic "Hardness, Ca, Mg", sites of type well, samples since 1980), retrieved 2026-10-29 through the Water Quality Portal. For each well we take the median of its samples, then the median of all wells in the county; wells above 1,000 mg/L (oil, gas or mine brines) are left out. USGS data are in the U.S. public domain. Water Quality Portal query

Well water hardness in Maryland → · Maryland: tap water by city →