Water Hardness Atlas ZIP / postcode

Well water hardness in Clinton County, Pennsylvania

7.6 gpg hard

Private wells in Clinton County typically give hard water: the median well sampled by the U.S. Geological Survey has 7.6 gpg (130 mg/L as CaCO₃).

<6060–120120–180>180 mg/L

Wells differ a lot, even next door: one in ten sampled wells had less than 25 mg/L and one in ten more than 327 mg/L. The figure comes from 73 wells and 139 samples taken between 1981 and 2023 (half of them by 2017).

What this hardness means for a well household

How to test your well in Pennsylvania

Hardness is only one part of a well test. Federal health agencies advise every private well owner to test regularly:

Use a certified laboratory: Pennsylvania DEP list of accredited laboratories (by county).

Pennsylvania has no statewide rule that requires testing of private wells.

What a test costs (Penn State Agricultural Analytical Services Lab)

Hardness (single test)$20
Standard: coliform, E. coli, pH, TDS$60
Aesthetics: standard + hardness, alkalinity, iron, manganese, copper$85
Extensive: + arsenic, lead, nitrate, sodium and more$220

Prices as printed by the lab (2026-10-24); check the current fee before you send a sample. Penn State Agricultural Analytical Services Lab

If no local lab suits you, mail-in kits from certified labs test a wider panel at home; they cost more than a state or county lab.

Treating hard well water

Most households with hard well water install an ion-exchange softener. Test iron and manganese first: above about 0.3 mg/L iron a softener alone is not enough and an iron filter goes in front of it.

Nearby counties

Union County7.9 gpgCentre County14.2 gpgLycoming County3.8 gpgSnyder County4.8 gpgMifflin County14.8 gpgJuniata County4.9 gpg

FAQ

How hard is well water in Clinton County, Pennsylvania?

The median well sampled by the USGS in Clinton County has 7.6 gpg (130 mg/L as CaCO₃), which is hard. One in ten wells had less than 25 mg/L and one in ten more than 327 mg/L.

Is my own well the same?

Not necessarily. Hardness depends on the rock layer your well draws from and on its depth, so neighbouring wells can differ by a factor of two or more. Only a test of your own water tells you.

How often should I test my well in Pennsylvania?

Every year for coliform bacteria, nitrate, total dissolved solids and pH (EPA and CDC advice), and after floods, repairs or a change in taste or smell. Hardness, iron and manganese once, and again before you buy a softener.

Do I need a water softener for my well?

Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.

Where does this figure come from?

From 139 samples of 73 wells measured by the U.S. Geological Survey between 1981 and 2023, retrieved from the Water Quality Portal. We publish a county only when at least 10 wells were sampled.

Source and method

Computed by Water Hardness Atlas from USGS National Water Information System samples (characteristic "Hardness, Ca, Mg", sites of type well, samples since 1980), retrieved 2026-10-24 through the Water Quality Portal. For each well we take the median of its samples, then the median of all wells in the county; wells above 1,000 mg/L (oil, gas or mine brines) are left out. USGS data are in the U.S. public domain. Water Quality Portal query

Well water hardness in Pennsylvania → · Pennsylvania: tap water by city →