Water hardness in Wrightstown
7.8 gpg hard
Tap water in Wrightstown is hard: 7.8 gpg (134 mg/L · 7.5 °dH · 13.4 °fH).
Source: Wisconsin DNR Drinking Water System portal (Wrightstown Waterworks) (2023) · data checked 2026-10-20
Range across supply zones: 130–144 mg/L.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 7.8 gpg |
|---|---|
| Utility | Wrightstown Waterworks |
How Wrightstown compares
- Tap water in Wrightstown is 14 % softer than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 810 of 1372 in the United States (1 = hardest); 41 % of these cities have softer water.
- In Wisconsin it is number 356 of 448 cities; the regional median is 14.3 gpg.
- Nearest city with clearly softer water: Kimberly, 15 km away (5.6 gpg).
- Nearest city with clearly harder water: Kaukauna, 9 km away (36.8 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Wrightstown
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 8 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Wrightstown water hard or soft?
It is hard: 134 mg/L as CaCO₃ (7.8 gpg, 7.5 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Wrightstown safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Wrightstown water?
7.8 gpg, equal to 7.5 °dH, 13.4 °fH or 134 mg/L calcium carbonate.
What dishwasher salt setting should I use in Wrightstown?
For 134 mg/L (7.5 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Wrightstown?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: Wisconsin DNR Drinking Water System portal (Wrightstown Waterworks) (2023). Method: figure published by the water supplier. Wisconsin DNR Drinking Water System portal (Wrightstown Waterworks) · Outdated figure? Tell us