Water hardness in Heathcote
110 mg/L moderately hard
Tap water in Heathcote is moderately hard: 110 mg/L (6.4 gpg · 6.2 °dH · 11 °fH).
Source: Coliban Water, Water hardness by location (CWM097, 2026-05) (2026-05) · data checked 2026-10-20
Australian Drinking Water Guidelines: aesthetic target ≤ 200 mg/L CaCO₃.
Water data
| Total hardness | 110 mg/L |
|---|---|
| Utility | Coliban Water |
How Heathcote compares
- Tap water in Heathcote is 29 % harder than the median of the 307 cities we track in Australia (85 mg/L).
- By hardness it ranks 84 of 307 in Australia (1 = hardest); 71 % of these cities have softer water.
- In Victoria it is number 10 of 46 cities; the regional median is 66 mg/L.
- Nearest city with clearly softer water: Elphinstone, 39 km away (72 mg/L).
Ranking of the hardest and softest water in Australia →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Heathcote
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 6 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Heathcote water hard or soft?
It is moderately hard: 110 mg/L as CaCO₃ (6.4 gpg, 6.2 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Heathcote safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Australian Drinking Water Guidelines: aesthetic target ≤ 200 mg/L CaCO₃.
How many grains per gallon is Heathcote water?
6.4 gpg, equal to 6.2 °dH, 11 °fH or 110 mg/L calcium carbonate.
What dishwasher salt setting should I use in Heathcote?
For 110 mg/L (6.2 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Heathcote?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Coliban Water, Water hardness by location (CWM097, 2026-05) (2026-05). Method: figure published by the water supplier. Coliban Water, Water hardness by location (CWM097, 2026-05) · Outdated figure? Tell us