Water hardness in Beerse
19.5 °fH very hard
Tap water in Beerse is very hard: 19.5 °fH (195 mg/L · 11.4 gpg · 10.9 °dH).
Source: VMM, Kwaliteit van het drinkwater per leveringsgebied 2024, bijlage 2 (mediane concentratie) (2024) · data checked 2026-10-19
Range across supply zones: 183–208 mg/L.
Pidpa supplies this part of the Campine, a sandy region where lime is largely absent from the aquifers, so groundwater here tends to be softer than elsewhere in Belgium; some Flemish supply also comes from Albert Canal surface water. The 2024 figure is 195.2 mg/L CaCO₃, within a reported range of 182.8 to 207.7 mg/L, so the exact value depends on your street. This is very hard water: expect heavy limescale on taps, glass and heating elements, and higher detergent and descaling needs.
Belgian suppliers report hardness in °f (French degrees); 1 °f = 10 mg/L CaCO₃.
Water data
| Total hardness | 19.5 °fH |
|---|---|
| Utility | Pidpa |
How Beerse compares
- Tap water in Beerse is 38 % softer than the median of the 1091 cities we track in Belgium (31.6 °fH).
- By hardness it ranks 780 of 1091 in Belgium (1 = hardest); 28 % of these cities have softer water.
- In Antwerpen it is number 12 of 65 cities; the regional median is 17.4 °fH.
- Nearest city with clearly softer water: Mol, 23 km away (11 °fH).
- Nearest city with clearly harder water: Tremelo, 38 km away (28.6 °fH).
Ranking of the hardest and softest water in Belgium →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Beerse
| Brand | Setting for this water |
|---|---|
| Bosch | H03 |
| Miele | 11 °dH |
| AEG / Electrolux | 3 |
| Beko | 3rd |
| Hoover | S2 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Beerse water hard or soft?
It is very hard: 195 mg/L as CaCO₃ (11.4 gpg, 10.9 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Beerse safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Belgian suppliers report hardness in °f (French degrees); 1 °f = 10 mg/L CaCO₃.
How many grains per gallon is Beerse water?
11.4 gpg, equal to 10.9 °dH, 19.5 °fH or 195 mg/L calcium carbonate.
What dishwasher salt setting should I use in Beerse?
For 195 mg/L (10.9 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Beerse?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: VMM, Kwaliteit van het drinkwater per leveringsgebied 2024, bijlage 2 (mediane concentratie) (2024). Method: figure published by the water supplier. VMM, Kwaliteit van het drinkwater per leveringsgebied 2024, bijlage 2 (mediane concentratie) · Outdated figure? Tell us