Water hardness in Přepeře
3.39 mmol/L very hard
Tap water in Přepeře is very hard: 3.39 mmol/L (339 mg/L · 19.8 gpg · 19 °dH).
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026) · data checked 2026-10-21
Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
Water data
| Total hardness | 3.39 mmol/L |
|---|---|
| Calcium (mg/L) | 123 |
| Magnesium (mg/L) | 7.78 |
| Utility | Severočeské vodovody a kanalizace, a.s. (SčVK) |
How Přepeře compares
- Tap water in Přepeře is 183 % harder than the median of the 1516 cities we track in Czechia (1.2 mmol/L).
- By hardness it ranks 186 of 1516 in Czechia (1 = hardest); 88 % of these cities have softer water.
- In Liberecký kraj it is number 9 of 273 cities; the regional median is 1.26 mmol/L.
- Nearest city with clearly softer water: Modřišice, 1 km away (2.6 mmol/L).
- Nearest city with clearly harder water: Pavlovice, 41 km away (4.25 mmol/L).
Ranking of the hardest and softest water in Czechia →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Přepeře
| Brand | Setting for this water |
|---|---|
| Bosch | H05 |
| Miele | 19 °dH |
| AEG / Electrolux | 5 |
| Beko | 5th |
| Hoover | S3 |
| LG | H3 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Přepeře water hard or soft?
It is very hard: 339 mg/L as CaCO₃ (19.8 gpg, 19 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Přepeře safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
How many grains per gallon is Přepeře water?
19.8 gpg, equal to 19 °dH, 33.9 °fH or 339 mg/L calcium carbonate.
What dishwasher salt setting should I use in Přepeře?
For 339 mg/L (19 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Přepeře?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026). Method: figure published by the water supplier. SčVK, Moje obec – kvalita vody (aktuální hodnoty) · Outdated figure? Tell us