Water hardness in Týn
1.85 mmol/L very hard
Tap water in Týn is very hard: 1.85 mmol/L (185 mg/L · 10.8 gpg · 10.4 °dH).
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026) · data checked 2026-10-21
SčVK lists 185.2 mg/L for Týn in the Česká Lípa district, which falls in the very hard band. It sits just above the boundary with hard water, so the practical difference is small. Expect scale on heating elements and glass, and descale kettles and coffee machines regularly.
Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
Water data
| Total hardness | 1.85 mmol/L |
|---|---|
| Calcium (mg/L) | 58 |
| Magnesium (mg/L) | 9.37 |
| Utility | Severočeské vodovody a kanalizace, a.s. (SčVK) |
How Týn compares
- Tap water in Týn is 54 % harder than the median of the 1516 cities we track in Czechia (1.2 mmol/L).
- By hardness it ranks 392 of 1516 in Czechia (1 = hardest); 74 % of these cities have softer water.
- In Liberecký kraj it is number 93 of 273 cities; the regional median is 1.26 mmol/L.
- Nearest city with clearly softer water: Korce, 4 km away (1.48 mmol/L).
- Nearest city with clearly harder water: Kruh, 2 km away (2.51 mmol/L).
Ranking of the hardest and softest water in Czechia →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Týn
| Brand | Setting for this water |
|---|---|
| Bosch | H03 |
| Miele | 10 °dH |
| AEG / Electrolux | 2 |
| Beko | 3rd |
| Hoover | S2 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Týn water hard or soft?
It is very hard: 185 mg/L as CaCO₃ (10.8 gpg, 10.4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Týn safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Czech suppliers report "Vápník a hořčík" in mmol/L; the recommended range is 2–3.5 mmol/L.
How many grains per gallon is Týn water?
10.8 gpg, equal to 10.4 °dH, 18.5 °fH or 185 mg/L calcium carbonate.
What dishwasher salt setting should I use in Týn?
For 185 mg/L (10.4 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Týn?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: SčVK, Moje obec – kvalita vody (aktuální hodnoty) (2026). Method: figure published by the water supplier. SčVK, Moje obec – kvalita vody (aktuální hodnoty) · Outdated figure? Tell us