Water hardness in Mengerskirchen
7.7 °dH hard
Tap water in Mengerskirchen is hard: 7.7 °dH (137 mg/L · 8 gpg · 13.7 °fH).
Source: Gemeinde Mengerskirchen - Wasserhärte-Tabelle (Härtebereiche 2023 PDF; sample date 09.07.2019, Institut Fresenius) (2019-07) · data checked 2026-11-06
Range across supply zones: 107–150 mg/L.
8 supply zones — hardness varies by neighbourhood; the figure above is the median.
Hardness by district / supply zone
| °dH | mg/L | ||
|---|---|---|---|
| Dillhausen | 8.4 | 150 | hard |
| Mengerskirchen Hochzone | 7.1 | 127 | hard |
| Mengerskirchen Tiefzone | 6 | 107 | moderately hard |
| Probbach Hochzone | 7.7 | 137 | hard |
| Probbach Tiefzone | 7.6 | 136 | hard |
| Waldernbach | 7.7 | 137 | hard |
| Winkels Hochzone | 7.7 | 137 | hard |
| Winkels Tiefzone | 6.9 | 123 | hard |
This figure is over 3 years old; hardness may have changed.
For Mengerskirchen the municipality publishes a table with eight hardness zones. The median is 136.6 mg/L and the values range from 107.1 to 149.9 mg/L, so the figure for your address depends on your district and supply area. The sample behind the table was taken on 9 July 2019 by Institut Fresenius, which makes the data outdated. Ask the water utility for current values before sizing a softener.
German law (WRMG) uses 3 bands: soft < 8.4 °dH, medium 8.4–14 °dH, hard > 14 °dH.
Water data
| Total hardness | 7.7 °dH |
|---|---|
| Utility | Gemeinde Mengerskirchen (Marktflecken), Leitungsnetz |
How Mengerskirchen compares
- Tap water in Mengerskirchen is 33 % softer than the median of the 809 cities we track in Germany (11.5 °dH).
- By hardness it ranks 593 of 809 in Germany (1 = hardest); 27 % of these cities have softer water.
- In Hessen it is number 54 of 73 cities; the regional median is 10.7 °dH.
- Nearest city with clearly softer water: Westerburg, 13 km away (4.2 °dH).
- Nearest city with clearly harder water: Ehringshausen, 15 km away (10.7 °dH).
Ranking of the hardest and softest water in Germany →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Mengerskirchen
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 8 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Mengerskirchen water hard or soft?
It is hard: 137 mg/L as CaCO₃ (8 gpg, 7.7 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Mengerskirchen safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. German law (WRMG) uses 3 bands: soft < 8.4 °dH, medium 8.4–14 °dH, hard > 14 °dH.
How many grains per gallon is Mengerskirchen water?
8 gpg, equal to 7.7 °dH, 13.7 °fH or 137 mg/L calcium carbonate.
What dishwasher salt setting should I use in Mengerskirchen?
For 137 mg/L (7.7 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Mengerskirchen?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: Gemeinde Mengerskirchen - Wasserhärte-Tabelle (Härtebereiche 2023 PDF; sample date 09.07.2019, Institut Fresenius) (2019-07). Method: older figure, source currently unavailable. Gemeinde Mengerskirchen - Wasserhärte-Tabelle (Härtebereiche 2023 PDF; sample date 09.07.2019, Institut Fresenius) · Outdated figure? Tell us