Water hardness in Ipacsfa
28.6 °dH very hard
Tap water in Ipacsfa is very hard: 28.6 °dH (510 mg/L · 29.8 gpg · 51 °fH).
Source: NNGYK — Magyarországi települések ivóvízminősége (HUMVI 2024) (2024) · data checked 2026-10-29
The NNGYK 2024 drinking-water survey reports 510.4 mg/L hardness for Ipacsfa in Baranya, which puts it in the very hard band. The survey does not name the local source, so treat the cause as unconfirmed. At this level, expect fast scale in kettles and on heating elements, and a softener or scale protection is worth considering.
Hungarian suppliers report total hardness in German degrees (nk°) or mg/L CaO; the limit is 50–350 mg/L CaO.
Water data
| Total hardness | 28.6 °dH |
|---|
How Ipacsfa compares
- Tap water in Ipacsfa is 78 % harder than the median of the 3053 cities we track in Hungary (16.1 °dH).
- By hardness it ranks 57 of 3053 in Hungary (1 = hardest); 98 % of these cities have softer water.
- In Baranya it is number 4 of 311 cities; the regional median is 20.7 °dH.
- Nearest city with clearly softer water: Drávaszabolcs, 3 km away (21.3 °dH).
- Nearest city with clearly harder water: Dunafalva, 52 km away (37.7 °dH).
Ranking of the hardest and softest water in Hungary →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Ipacsfa
| Brand | Setting for this water |
|---|---|
| Bosch | H06 |
| Miele | 29 °dH |
| AEG / Electrolux | 6 |
| Beko | 6th |
| Hoover | S4 |
| LG | H4 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Ipacsfa water hard or soft?
It is very hard: 510 mg/L as CaCO₃ (29.8 gpg, 28.6 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Ipacsfa safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Hungarian suppliers report total hardness in German degrees (nk°) or mg/L CaO; the limit is 50–350 mg/L CaO.
How many grains per gallon is Ipacsfa water?
29.8 gpg, equal to 28.6 °dH, 51 °fH or 510 mg/L calcium carbonate.
What dishwasher salt setting should I use in Ipacsfa?
For 510 mg/L (28.6 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Ipacsfa?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: NNGYK — Magyarországi települések ivóvízminősége (HUMVI 2024) (2024). Method: figure published by the water supplier. NNGYK — Magyarországi települések ivóvízminősége (HUMVI 2024) · Outdated figure? Tell us