Water hardness in Kasukabe
64 mg/L moderately hard
Tap water in Kasukabe is moderately hard: 64 mg/L (3.7 gpg · 3.6 °dH · 6.4 °fH).
Source: Kasukabe City, water quality test results FY2025 (令和7年度水質検査結果) (2025) · data checked 2026-10-21
Range across supply zones: 42–84 mg/L.
Kasukabe sits in the part of Saitama where Tone and Arakawa river water treated by the prefecture is the main supply, with some cities adding their own wells; the exact mix for Kasukabe is not confirmed here. Hardness is reported at 64.0 mg/L CaCO₃, ranging from 42.2 to 84.2 mg/L (2025 data). Expect gradual white deposits on kettles, taps and showerheads; descaling now and then with citric acid is usually enough.
Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
Water data
| Total hardness | 64 mg/L |
|---|---|
| Utility | Kasukabe City Waterworks (春日部市水道事業) |
How Kasukabe compares
- Tap water in Kasukabe is 27 % harder than the median of the 228 cities we track in Japan (50 mg/L).
- By hardness it ranks 53 of 228 in Japan (1 = hardest); 76 % of these cities have softer water.
- In Saitama it is number 7 of 9 cities; the regional median is 67 mg/L.
- Nearest city with clearly softer water: Itakura, 30 km away (41 mg/L).
- Nearest city with clearly harder water: Musashino, 35 km away (82 mg/L).
Ranking of the hardest and softest water in Japan →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Kasukabe
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 4 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Kasukabe water hard or soft?
It is moderately hard: 64 mg/L as CaCO₃ (3.7 gpg, 3.6 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Kasukabe safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
How many grains per gallon is Kasukabe water?
3.7 gpg, equal to 3.6 °dH, 6.4 °fH or 64 mg/L calcium carbonate.
What dishwasher salt setting should I use in Kasukabe?
For 64 mg/L (3.6 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Kasukabe?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Kasukabe City, water quality test results FY2025 (令和7年度水質検査結果) (2025). Method: figure published by the water supplier. Kasukabe City, water quality test results FY2025 (令和7年度水質検査結果) · Outdated figure? Tell us