Water hardness in Oita
72 mg/L moderately hard
Tap water in Oita is moderately hard: 72 mg/L (4.2 gpg · 4 °dH · 7.2 °fH).
Source: 大分市上下水道局 Oita City Waterworks Bureau, monthly tap-water quality results FY2025 (2025) · data checked 2026-10-21
Range across supply zones: 21–130 mg/L.
Oita takes about 97% of its water from surface sources, chiefly the Ōno and Ōita rivers, with groundwater for the rest. Hardness is reported at 72.0 mg/L CaCO₃, ranging from 21.0 to 130.0 mg/L (2025 data); the spread is wide, so the value at your tap depends on where in the supply area you live. Deposits form on kettles, heaters and showerheads fairly quickly at this level, so regular descaling matters.
Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
Water data
| Total hardness | 72 mg/L |
|---|---|
| Utility | Oita City Waterworks Bureau |
How Oita compares
- Tap water in Oita is 43 % harder than the median of the 228 cities we track in Japan (50 mg/L).
- By hardness it ranks 20 of 228 in Japan (1 = hardest); 92 % of these cities have softer water.
- Nearest city with clearly softer water: Nobeoka, 73 km away (23 mg/L).
Ranking of the hardest and softest water in Japan →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Oita
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 4 °dH |
| AEG / Electrolux | 2 |
| Beko | 1st |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Oita water hard or soft?
It is moderately hard: 72 mg/L as CaCO₃ (4.2 gpg, 4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Oita safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
How many grains per gallon is Oita water?
4.2 gpg, equal to 4 °dH, 7.2 °fH or 72 mg/L calcium carbonate.
What dishwasher salt setting should I use in Oita?
For 72 mg/L (4 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Oita?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: 大分市上下水道局 Oita City Waterworks Bureau, monthly tap-water quality results FY2025 (2025). Method: figure published by the water supplier. 大分市上下水道局 Oita City Waterworks Bureau, monthly tap-water quality results FY2025 · Outdated figure? Tell us