Water hardness in Yamaguchi
31 mg/L soft
Tap water in Yamaguchi is soft: 31 mg/L (1.8 gpg · 1.7 °dH · 3.1 °fH).
Source: Yamaguchi City Waterworks Bureau, 水質検査結果 令和6年度 (district files) (2024) · data checked 2026-11-07
Range across supply zones: 30–42 mg/L.
Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
Water data
| Total hardness | 31 mg/L |
|---|---|
| Utility | 山口市上下水道局 Yamaguchi City Waterworks Bureau |
How Yamaguchi compares
- Tap water in Yamaguchi is 38 % softer than the median of the 228 cities we track in Japan (50 mg/L).
- By hardness it ranks 206 of 228 in Japan (1 = hardest); 10 % of these cities have softer water.
- Nearest city with clearly softer water: Hiroshima, 93 km away (20 mg/L).
- Nearest city with clearly harder water: Kitakyushu, 68 km away (45 mg/L).
Ranking of the hardest and softest water in Japan →
What it means at home
- Little or no limescale in kettles, water heaters or washing machines.
- Soap lathers easily; water does not dry skin or hair.
- Dishwasher: salt setting at minimum or off.
- No softener needed; a jug filter only changes taste.
How much salt will you use for softening?
No. Water this soft does not need softening.
Descale a coffee machine or kettle about every 6 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Yamaguchi
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 2 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Yamaguchi water hard or soft?
It is soft: 31 mg/L as CaCO₃ (1.8 gpg, 1.7 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Yamaguchi safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Japanese waterworks report hardness (硬度) in mg/L CaCO₃; the standard is 300 mg/L and the target 10–100 mg/L.
How many grains per gallon is Yamaguchi water?
1.8 gpg, equal to 1.7 °dH, 3.1 °fH or 31 mg/L calcium carbonate.
What dishwasher salt setting should I use in Yamaguchi?
For 31 mg/L (1.7 °dH) check your manufacturer's table: level 0–1, usually no salt.
Do I need a water softener in Yamaguchi?
No. With soft water a softener adds nothing.
Source
Source: Yamaguchi City Waterworks Bureau, 水質検査結果 令和6年度 (district files) (2024). Method: figure published by the water supplier. Yamaguchi City Waterworks Bureau, 水質検査結果 令和6年度 (district files) · Outdated figure? Tell us