Water hardness in Brawley
19.3 gpg very hard
Tap water in Brawley is very hard: 19.3 gpg (330 mg/L · 18.5 °dH · 33 °fH).
Source: City of Brawley 2024 Consumer Confidence Report (2024) · data checked 2026-11-02
The City of Brawley's 2024 Consumer Confidence Report lists hardness of 330 mg/L as CaCO₃, which is very hard. The report gives one value and no range. Scale on water heaters, faucets and appliances is likely to be significant, and a softener is worth considering.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 19.3 gpg |
|---|---|
| calcium_ppm | 87 |
| Utility | City of Brawley Water |
How Brawley compares
- Tap water in Brawley is 113 % harder than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 168 of 1372 in the United States (1 = hardest); 87 % of these cities have softer water.
- In California it is number 33 of 336 cities; the regional median is 9.5 gpg.
Ranking of the hardest and softest water in the United States →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Brawley
| Brand | Setting for this water |
|---|---|
| Bosch | H05 |
| Miele | 18 °dH |
| AEG / Electrolux | 4 |
| Beko | 5th |
| Hoover | S3 |
| LG | H3 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Brawley water hard or soft?
It is very hard: 330 mg/L as CaCO₃ (19.3 gpg, 18.5 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Brawley safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Brawley water?
19.3 gpg, equal to 18.5 °dH, 33 °fH or 330 mg/L calcium carbonate.
What dishwasher salt setting should I use in Brawley?
For 330 mg/L (18.5 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Brawley?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: City of Brawley 2024 Consumer Confidence Report (2024). Method: figure published by the water supplier. City of Brawley 2024 Consumer Confidence Report · Outdated figure? Tell us