Water hardness in Cheyenne
3.5 gpg moderately hard
Tap water in Cheyenne is moderately hard: 3.5 gpg (60 mg/L · 3.4 °dH · 6 °fH).
Source: Cheyenne BOPU water hardness web page (2026) · data checked 2026-10-20
Range across supply zones: 50–70 mg/L.
Cheyenne BOPU's hardness page lists 50 to 70 mg/L (about 3.5 gpg at the 60 mg/L midpoint), which is moderately hard water. At this level scale builds slowly, so a softener is usually optional. The BOPU page gives a range without a measurement year, so the page shows the midpoint.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 3.5 gpg |
|---|---|
| Utility | Cheyenne Board of Public Utilities (BOPU) |
How Cheyenne compares
- Tap water in Cheyenne is 61 % softer than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 1179 of 1372 in the United States (1 = hardest); 14 % of these cities have softer water.
- Nearest city with clearly softer water: Longmont, 111 km away (1.3 gpg).
- Nearest city with clearly harder water: Broomfield, 137 km away (4.8 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Cheyenne
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 3 °dH |
| AEG / Electrolux | 1 |
| Beko | 1st |
| Hoover | S0 |
| LG | H0 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Cheyenne water hard or soft?
It is moderately hard: 60 mg/L as CaCO₃ (3.5 gpg, 3.4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Cheyenne safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Cheyenne water?
3.5 gpg, equal to 3.4 °dH, 6 °fH or 60 mg/L calcium carbonate.
What dishwasher salt setting should I use in Cheyenne?
For 60 mg/L (3.4 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Cheyenne?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: Cheyenne BOPU water hardness web page (2026). Method: computed from supplier's calcium and magnesium. Cheyenne BOPU water hardness web page · Outdated figure? Tell us