Water hardness in Marysville
12.3 gpg very hard
Tap water in Marysville is very hard: 12.3 gpg (210 mg/L · 11.8 °dH · 21 °fH).
Source: California SWRCB Division of Drinking Water, EDT lab results, system CA5810001 (2026-03) · data checked 2026-10-19
Range across supply zones: 167–278 mg/L.
The figure is for California Water Service in Marysville, from State Water Resources Control Board lab results. The median of 18 results from 2021 to 2026, taken at 8 well points, is 210 mg/L as CaCO3 (12.3 gpg), with a range of 167 to 278 mg/L. This is very hard water. Scale builds quickly on heaters and fixtures.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 12.3 gpg |
|---|---|
| Utility | Cal-Water Service Co.-Marysville |
How Marysville compares
- Tap water in Marysville is 35 % harder than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 489 of 1372 in the United States (1 = hardest); 63 % of these cities have softer water.
- In California it is number 107 of 336 cities; the regional median is 9.5 gpg.
- Nearest city with clearly softer water: Oroville, 38 km away (7.6 gpg).
- Nearest city with clearly harder water: Dunnigan, 45 km away (16.9 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Marysville
| Brand | Setting for this water |
|---|---|
| Bosch | H03 |
| Miele | 12 °dH |
| AEG / Electrolux | 3 |
| Beko | 3rd |
| Hoover | S2 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Marysville water hard or soft?
It is very hard: 210 mg/L as CaCO₃ (12.3 gpg, 11.8 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Marysville safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Marysville water?
12.3 gpg, equal to 11.8 °dH, 21 °fH or 210 mg/L calcium carbonate.
What dishwasher salt setting should I use in Marysville?
For 210 mg/L (11.8 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Marysville?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: California SWRCB Division of Drinking Water, EDT lab results, system CA5810001 (2026-03). Method: own measurement. California SWRCB Division of Drinking Water, EDT lab results, system CA5810001 · Outdated figure? Tell us