Water hardness in Shakopee
21 gpg very hard
Tap water in Shakopee is very hard: 21 gpg (360 mg/L · 20.1 °dH · 36 °fH).
Source: Shakopee Public Utilities - Water Service Information (2026) · data checked 2026-11-02
Shakopee Public Utilities reports a hardness of 359.5 mg/L on its water service page (2026). That is very hard, among the higher values in this batch. Heavy scale on water heaters and fixtures is likely, and a softener is a common choice in the area.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 21 gpg |
|---|---|
| Utility | Shakopee Public Utilities |
How Shakopee compares
- Tap water in Shakopee is 132 % harder than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 114 of 1372 in the United States (1 = hardest); 92 % of these cities have softer water.
- In Minnesota it is number 5 of 23 cities; the regional median is 17 gpg.
Ranking of the hardest and softest water in the United States →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Shakopee
| Brand | Setting for this water |
|---|---|
| Bosch | H05 |
| Miele | 20 °dH |
| AEG / Electrolux | 5 |
| Beko | 6th |
| Hoover | S3 |
| LG | H3 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Shakopee water hard or soft?
It is very hard: 360 mg/L as CaCO₃ (21 gpg, 20.1 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Shakopee safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Shakopee water?
21 gpg, equal to 20.1 °dH, 36 °fH or 360 mg/L calcium carbonate.
What dishwasher salt setting should I use in Shakopee?
For 360 mg/L (20.1 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Shakopee?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: Shakopee Public Utilities - Water Service Information (2026). Method: figure published by the water supplier. Shakopee Public Utilities - Water Service Information · Outdated figure? Tell us