Water hardness in South Salt Lake
6.9 gpg moderately hard
Tap water in South Salt Lake is moderately hard: 6.9 gpg (118 mg/L · 6.6 °dH · 11.8 °fH).
Source: South Salt Lake Annual Drinking Water Quality Report (2020 data) (2020) · data checked 2026-11-02
Range across supply zones: 44–191 mg/L.
This figure is over 3 years old; hardness may have changed.
South Salt Lake's drinking water report, using 2020 data, gives a computed hardness of 117.5 mg/L as CaCO3, with a range of 43.9 to 191 mg/L. The range is wide, so the figure at your tap may differ from the median. The data is several years old, so treat it as a guide.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 6.9 gpg |
|---|---|
| Utility | South Salt Lake City Water System |
How South Salt Lake compares
- Tap water in South Salt Lake is 24 % softer than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 922 of 1372 in the United States (1 = hardest); 33 % of these cities have softer water.
- In Utah it is number 14 of 14 cities; the regional median is 10.9 gpg.
Ranking of the hardest and softest water in the United States →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in South Salt Lake
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 7 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is South Salt Lake water hard or soft?
It is moderately hard: 118 mg/L as CaCO₃ (6.9 gpg, 6.6 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in South Salt Lake safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is South Salt Lake water?
6.9 gpg, equal to 6.6 °dH, 11.8 °fH or 118 mg/L calcium carbonate.
What dishwasher salt setting should I use in South Salt Lake?
For 118 mg/L (6.6 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in South Salt Lake?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: South Salt Lake Annual Drinking Water Quality Report (2020 data) (2020). Method: computed from supplier's calcium and magnesium. South Salt Lake Annual Drinking Water Quality Report (2020 data) · Outdated figure? Tell us