Water hardness in Ypsilanti
6.9 gpg moderately hard
Tap water in Ypsilanti is moderately hard: 6.9 gpg (118 mg/L · 6.6 °dH · 11.8 °fH).
Source: YCUA 2023 Drinking Water Quality Report (2023) · data checked 2026-11-02
Range across supply zones: 90–166 mg/L.
The Ypsilanti Community Utilities Authority reports a median of 118 mg/L in its 2023 report, with a range of 90 to 166 mg/L. The spread is wide, so readings at your tap may differ. The median is moderate, but the top of the range reaches the hard band.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 6.9 gpg |
|---|---|
| Utility | Ypsilanti Community Utilities Authority |
How Ypsilanti compares
- Tap water in Ypsilanti is 24 % softer than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 912 of 1372 in the United States (1 = hardest); 33 % of these cities have softer water.
- In Michigan it is number 8 of 28 cities; the regional median is 6.2 gpg.
Ranking of the hardest and softest water in the United States →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Ypsilanti
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 7 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Ypsilanti water hard or soft?
It is moderately hard: 118 mg/L as CaCO₃ (6.9 gpg, 6.6 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Ypsilanti safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Ypsilanti water?
6.9 gpg, equal to 6.6 °dH, 11.8 °fH or 118 mg/L calcium carbonate.
What dishwasher salt setting should I use in Ypsilanti?
For 118 mg/L (6.6 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Ypsilanti?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: YCUA 2023 Drinking Water Quality Report (2023). Method: figure published by the water supplier. YCUA 2023 Drinking Water Quality Report · Outdated figure? Tell us