Water hardness in Burlada/Burlata
12.5 °fH hard
Tap water in Burlada/Burlata is hard: 12.5 °fH (125 mg/L · 7.3 gpg · 7 °dH).
Source: SINAC, Ministerio de Sanidad — Información de un abastecimiento, municipio 31060 (2026-09) · data checked 2026-10-19
The hardness recorded in SINAC for Burlada/Burlata is 125 mg/L CaCO₃, based on September 2026 data. The Pamplona area mancomunidad draws on the Arteta spring and the Eugi and Itoiz reservoirs depending on the season; Arteta rises in limestone terrain and carries a fair amount of hardness. Some scale shows on shower screens, kettles and taps, and a scale-reduction filter can be reasonable if you want to protect appliances.
Fuentes españolas usan °fH (grados hidrotimétricos franceses) o mg/L CaCO₃.
Water data
| Total hardness | 12.5 °fH |
|---|
How Burlada/Burlata compares
- Tap water in Burlada/Burlata is 38 % softer than the median of the 4988 cities we track in Spain (20.1 °fH).
- By hardness it ranks 3320 of 4988 in Spain (1 = hardest); 33 % of these cities have softer water.
- In Navarra it is number 121 of 136 cities; the regional median is 22.6 °fH.
- Nearest city with clearly softer water: Ansoáin / Antsoain, 2 km away (7.5 °fH).
- Nearest city with clearly harder water: Orkoien, 7 km away (19.3 °fH).
Ranking of the hardest and softest water in Spain →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Burlada/Burlata
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 7 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Burlada/Burlata water hard or soft?
It is hard: 125 mg/L as CaCO₃ (7.3 gpg, 7 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Burlada/Burlata safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Fuentes españolas usan °fH (grados hidrotimétricos franceses) o mg/L CaCO₃.
How many grains per gallon is Burlada/Burlata water?
7.3 gpg, equal to 7 °dH, 12.5 °fH or 125 mg/L calcium carbonate.
What dishwasher salt setting should I use in Burlada/Burlata?
For 125 mg/L (7 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Burlada/Burlata?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: SINAC, Ministerio de Sanidad — Información de un abastecimiento, municipio 31060 (2026-09). Method: own measurement. SINAC, Ministerio de Sanidad — Información de un abastecimiento, municipio 31060 · Outdated figure? Tell us