Water hardness in Pilas
8.8 °fH moderately hard
Tap water in Pilas is moderately hard: 8.8 °fH (88 mg/L · 5.1 gpg · 4.9 °dH).
Source: SINAC, Ministerio de Sanidad — Información de un abastecimiento, municipio 41075 (2026-04) · data checked 2026-10-19
SINAC, the Ministry of Health's drinking-water register, reports 88 mg/L CaCO₃ for Pilas, moderately hard. Neighbouring Aljarafe towns in the dataset sit between 83 and 100 mg/L, so the figure is typical for the area. Some scale builds up on kettles and taps; an occasional descale is usually enough.
Fuentes españolas usan °fH (grados hidrotimétricos franceses) o mg/L CaCO₃.
Water data
| Total hardness | 8.8 °fH |
|---|
How Pilas compares
- Tap water in Pilas is 56 % softer than the median of the 4988 cities we track in Spain (20.1 °fH).
- By hardness it ranks 3739 of 4988 in Spain (1 = hardest); 25 % of these cities have softer water.
- In Sevilla it is number 85 of 103 cities; the regional median is 11.8 °fH.
- Nearest city with clearly softer water: Almonte, 19 km away (6.6 °fH).
- Nearest city with clearly harder water: Hinojos, 14 km away (21.9 °fH).
Ranking of the hardest and softest water in Spain →
What it means at home
- Visible kettle scale every few weeks; vinegar or citric acid is enough.
- Water heater and washing machine: some long-term scale; a scale inhibitor slows it.
- Dishwasher: medium salt setting.
- Softener optional; pays off mainly with a gas boiler or tankless heater.
How much salt will you use for softening?
Optional. A scale inhibitor or a small softener protects the heater; soap savings are modest.
Descale a coffee machine or kettle about every 3 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Pilas
| Brand | Setting for this water |
|---|---|
| Bosch | H00 |
| Miele | 5 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H1 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Pilas water hard or soft?
It is moderately hard: 88 mg/L as CaCO₃ (5.1 gpg, 4.9 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Pilas safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. Fuentes españolas usan °fH (grados hidrotimétricos franceses) o mg/L CaCO₃.
How many grains per gallon is Pilas water?
5.1 gpg, equal to 4.9 °dH, 8.8 °fH or 88 mg/L calcium carbonate.
What dishwasher salt setting should I use in Pilas?
For 88 mg/L (4.9 °dH) check your manufacturer's table: level 2–3.
Do I need a water softener in Pilas?
Not essential; a scale inhibitor protects the heater cheaply.
Source
Source: SINAC, Ministerio de Sanidad — Información de un abastecimiento, municipio 41075 (2026-04). Method: own measurement. SINAC, Ministerio de Sanidad — Información de un abastecimiento, municipio 41075 · Outdated figure? Tell us