Water hardness in Bel Aire
8.8 gpg hard
Tap water in Bel Aire is hard: 8.8 gpg (150 mg/L · 8.4 °dH · 15 °fH).
Source: City of Bel Aire 2024 Consumer Confidence Report (2023) · data checked 2026-11-04
Bel Aire, Kansas, publishes 150 mg/L as CaCO3 (hard) in its consumer confidence report. The sample dates from 2023, even though the report is the 2024 edition, so treat it as a dated figure. We found no utility page naming the source in detail, so we do not state where the water comes from. Hard water at this level leaves visible scale on fixtures and shortens the life of water heaters.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 8.8 gpg |
|---|
How Bel Aire compares
- Tap water in Bel Aire is close to the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 707 of 1372 in the United States (1 = hardest); 48 % of these cities have softer water.
- In Kansas it is number 8 of 17 cities; the regional median is 8.4 gpg.
- Nearest city with clearly harder water: Haysville, 25 km away (12.3 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Bel Aire
| Brand | Setting for this water |
|---|---|
| Bosch | H02 |
| Miele | 8 °dH |
| AEG / Electrolux | 2 |
| Beko | 3rd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Bel Aire water hard or soft?
It is hard: 150 mg/L as CaCO₃ (8.8 gpg, 8.4 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Bel Aire safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Bel Aire water?
8.8 gpg, equal to 8.4 °dH, 15 °fH or 150 mg/L calcium carbonate.
What dishwasher salt setting should I use in Bel Aire?
For 150 mg/L (8.4 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Bel Aire?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: City of Bel Aire 2024 Consumer Confidence Report (2023). Method: older figure, source currently unavailable. City of Bel Aire 2024 Consumer Confidence Report · Outdated figure? Tell us