Water hardness in Haysville
12.3 gpg very hard
Tap water in Haysville is very hard: 12.3 gpg (210 mg/L · 11.8 °dH · 21 °fH).
Source: City of Haysville Water Department, water page (hardness figure) (2026) · data checked 2026-11-03
The City of Haysville Water Department publishes its hardness figure in grains per gallon on its water page. We converted it to 209.9 mg/L (12.3 gpg), which is very hard. The page gives a single figure and no range, so treat it as a typical value; nearby Winfield reports a lower 120 mg/L (7.0 gpg).
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 12.3 gpg |
|---|---|
| Utility | City of Haysville Water Department |
How Haysville compares
- Tap water in Haysville is 35 % harder than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 503 of 1372 in the United States (1 = hardest); 63 % of these cities have softer water.
- In Kansas it is number 5 of 17 cities; the regional median is 8.4 gpg.
- Nearest city with clearly softer water: Bel Aire, 25 km away (8.8 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Severe scale: heater elements and washing-machine heaters fail early.
- Detergent use is very high; taps and screens coat within days.
- Dishwasher at maximum salt setting.
- An ion-exchange softener is practically essential; RO for drinking water.
How much salt will you use for softening?
Yes. At this hardness a softener pays for itself through appliance life and detergent.
Descale a coffee machine or kettle about every 1 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Haysville
| Brand | Setting for this water |
|---|---|
| Bosch | H03 |
| Miele | 12 °dH |
| AEG / Electrolux | 3 |
| Beko | 3rd |
| Hoover | S2 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Haysville water hard or soft?
It is very hard: 210 mg/L as CaCO₃ (12.3 gpg, 11.8 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Haysville safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Haysville water?
12.3 gpg, equal to 11.8 °dH, 21 °fH or 210 mg/L calcium carbonate.
What dishwasher salt setting should I use in Haysville?
For 210 mg/L (11.8 °dH) check your manufacturer's table: maximum level (5–7).
Do I need a water softener in Haysville?
Yes, unless you are only passing through: scale damages appliances within a few years.
Source
Source: City of Haysville Water Department, water page (hardness figure) (2026). Method: figure published by the water supplier. City of Haysville Water Department, water page (hardness figure) · Outdated figure? Tell us