Water hardness in Burleson
7.3 gpg hard
Tap water in Burleson is hard: 7.3 gpg (126 mg/L · 7 °dH · 12.6 °fH).
Source: City of Burleson 2024 Water Quality Report (Consumer Confidence Report) (2024) · data checked 2026-10-20
Range across supply zones: 77–175 mg/L.
Burleson's 2024 water quality report gives total hardness as CaCO3 between 76.5 and 175 ppm (4.5-10.2 gpg), with no average printed. The listed value is the midpoint of that range, so actual hardness at your tap could sit anywhere in it. The report covers the city system only, and other suppliers serve parts of the area.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 7.3 gpg |
|---|---|
| Utility | City of Burleson Public Works |
How Burleson compares
- Tap water in Burleson is 19 % softer than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 859 of 1372 in the United States (1 = hardest); 37 % of these cities have softer water.
- In Texas it is number 40 of 60 cities; the regional median is 8.6 gpg.
- Nearest city with clearly harder water: Grand Prairie, 38 km away (9.9 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Burleson
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 7 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Burleson water hard or soft?
It is hard: 126 mg/L as CaCO₃ (7.3 gpg, 7 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Burleson safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Burleson water?
7.3 gpg, equal to 7 °dH, 12.6 °fH or 126 mg/L calcium carbonate.
What dishwasher salt setting should I use in Burleson?
For 126 mg/L (7 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Burleson?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: City of Burleson 2024 Water Quality Report (Consumer Confidence Report) (2024). Method: computed from supplier's calcium and magnesium. City of Burleson 2024 Water Quality Report (Consumer Confidence Report) · Outdated figure? Tell us