Water hardness in Fort Worth
7.5 gpg hard
Tap water in Fort Worth is hard: 7.5 gpg (129 mg/L · 7.2 °dH · 12.9 °fH).
Source: Fort Worth Water 2025 Water Quality Report (2025) · data checked 2026-10-19
Range across supply zones: 108–150 mg/L.
Fort Worth Water's 2025 report lists total hardness as CaCO3 between 108 and 150 mg/L (6 to 9 gpg), and it prints no average. The 129 mg/L (7.5 gpg) shown here is the midpoint of that range and is computed. The water is hard, so expect visible scale on kettles and shower screens.
USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
Water data
| Total hardness | 7.5 gpg |
|---|---|
| Utility | Fort Worth Water |
How Fort Worth compares
- Tap water in Fort Worth is 17 % softer than the median of the 1372 cities we track in the United States (9.1 gpg).
- By hardness it ranks 840 of 1372 in the United States (1 = hardest); 39 % of these cities have softer water.
- In Texas it is number 38 of 60 cities; the regional median is 8.6 gpg.
- Nearest city with clearly harder water: Grand Prairie, 31 km away (9.9 gpg).
Ranking of the hardest and softest water in the United States →
What it means at home
- Fast scale on taps, shower screens and kettle; white spots on glassware.
- Water heater: efficiency loss and element failures within years if unprotected.
- Dry skin and dull hair after showering are common.
- Softener recommended; jug or reverse osmosis for drinking.
How much salt will you use for softening?
Recommended, especially with a heater or boiler: scale cuts efficiency and shortens its life.
Descale a coffee machine or kettle about every 2 months (typical manufacturer guidance for this hardness).
Estimates for planning, not a quote. Check your appliance manual for exact settings.
Dishwasher setting in Fort Worth
| Brand | Setting for this water |
|---|---|
| Bosch | H01 |
| Miele | 7 °dH |
| AEG / Electrolux | 2 |
| Beko | 2nd |
| Hoover | S1 |
| LG | H2 |
From each brand's manual for the model family named in the source; your model may differ, so check its manual. All brands and how to change the setting →
FAQ
Is Fort Worth water hard or soft?
It is hard: 129 mg/L as CaCO₃ (7.5 gpg, 7.2 °dH). The usual bands are soft < 60, moderately hard 60–120, hard 120–180 and very hard > 180 mg/L.
Is tap water in Fort Worth safe to drink?
Hardness is not a health issue; it is about limescale, taste and appliances. Mains water must meet national drinking-water standards. USGS classes: soft 0–60, moderately hard 61–120, hard 121–180, very hard >180 mg/L.
How many grains per gallon is Fort Worth water?
7.5 gpg, equal to 7.2 °dH, 12.9 °fH or 129 mg/L calcium carbonate.
What dishwasher salt setting should I use in Fort Worth?
For 129 mg/L (7.2 °dH) check your manufacturer's table: level 4–5.
Do I need a water softener in Fort Worth?
Recommended if you have a water heater, boiler or tankless unit: it saves repairs and detergent.
Source
Source: Fort Worth Water 2025 Water Quality Report (2025). Method: computed from supplier's calcium and magnesium. Fort Worth Water 2025 Water Quality Report · Outdated figure? Tell us